COMMDEC Support FAQ's

Daylight Savings Time Change **Please note: Commdec's OS2 based products are not affected by the time change.

Properties with a PPIC (PPIC/DID/AWF) or AWFLite
• Press CTRL + END from the communications screen
• Type "TIME" at the C:\PPICOS2 Prompt
• Enter the correct time hh:mm:ss press ENTER
• Type PPICCOMM.BAT press ENTER
• The time should have changed on the Communications Screen

Properties with an AWF NT
• Press ENTER 3 Times the communications screen
• Type "TIME" at the C:\WAKEUP Prompt
• Enter the correct time hh:mm:ss press ENTER
• Type WAKEUP press ENTER
• The time should have changed on the Communications Screen